AMUMU GLORIFIER Acoustic Guitar Preamp DI Direct Box

Bring Your Acoustic Sound Forward with the AMUMU GLORIFIER Preamp DI

When an acoustic-electric instrument needs to travel from the stage to a mixer, PA system, recording interface, or amplifier, the AMUMU GLORIFIER Acoustic Preamp DI Direct Box gives your signal a clear, controllable path. Built for acoustic-electric guitars and other instruments with piezo, magnetic, under-saddle, or microphone pickups, GLORIFIER combines practical gain staging, three-band EQ, a phase switch, and flexible outputs in a compact pedalboard-ready format.

With up to ±20 dB of gain and dedicated Bass, Mid, and Treble controls, GLORIFIER lets you shape the body, definition, and presence of your instrument before it reaches the next stage of your signal chain. Its phase switch is designed to help reduce feedback in live environments, while the 1/4 in input, XLR balanced DI output, and 1/4 in unbalanced line output make it simple to build a setup around the gear you already use.

Built for Acoustic-Electric Instruments

GLORIFIER is designed for acoustic-electric instruments using a range of pickup systems. Connect your guitar, bass, ukulele, cajon, or banjo through the 1/4 in instrument input, then send a balanced low-impedance signal to a mixer, PA system, microphone preamp, or recording interface through the XLR DI output. The 1/4 in line output can be used at the same time for a tuner, monitor, or instrument amplifier.

Shape the Tone Before It Hits the PA

Small EQ changes can make a significant difference once an acoustic instrument is amplified. GLORIFIER gives you a three-band EQ with up to ±20 dB of adjustment: Bass at 100 Hz, Mid at 1.5 kHz, and Treble at 10 kHz. The Gain control sets input sensitivity before the EQ section, while the output Volume control helps you match the level to the next device in your chain.

For live situations where stage volume and monitor placement can create unwanted resonance, the Phase switch provides a quick feedback-management option. It is a practical control to have within reach when you need to adapt your acoustic signal to a changing room or stage.

Three Ways to Power Your Setup

GLORIFIER can run from a standard 9V DC center-negative power supply, 12–48V phantom power delivered through the XLR DI output, or a PP3-size 9V battery. This flexibility makes the unit easy to integrate into a pedalboard, a mixer-based stage setup, or a compact grab-and-go acoustic rig. When powered by an alkaline 9V battery, expected continuous operating time is approximately 20–25 hours, depending on conditions.

AMUMU GLORIFIER Product Features:

• Handcrafted acoustic preamp DI direct box for acoustic-electric instruments
• Designed for piezo, magnetic, under-saddle, and microphone pickup systems
• ±20 dB Gain control with 3-band EQ for Bass, Mid, and Treble shaping
• Bass control: ±20 dB at 100 Hz; Mid: ±20 dB at 1.5 kHz; Treble: ±20 dB at 10 kHz
• Phase switch designed to help reduce feedback in amplified live setups
• 1/4 in unbalanced instrument input with 1 MΩ input impedance
• Balanced XLR DI output for mixers, PA systems, microphone preamps, and recording interfaces
• 1/4 in unbalanced line output for a tuner, monitor, or instrument amplifier
• XLR DI and 1/4 in line outputs can be used simultaneously
• Powered by 9V DC center-negative adapter, 12–48V phantom power through XLR DI, or PP3-size 9V battery
• 30 Hz–30 kHz frequency response
• Approximate 20–25 hour alkaline-battery life, depending on conditions

AMUMU GLORIFIER Specifications:

Important: 9V power adapter, 9V battery, and XLR cable are not included unless explicitly stated by the selected retailer.